Optimization of culture conditions for biohydrogen production from sago wastewater by Enterobacter aerogenes using Response Surface Methodology

Sago wastewater (SWW) causes pollution to the environment due to its high organic content. Annually, about 2.5 million tons of SWW is produced in Malaysia. In this study, the potential of SWW as a substrate for biohydrogen production by Enterobacter aerogenes (E. aerogenes) was evaluated. Response Surface Methodology (RSM) was employed to find the optimum conditions. From preliminary optimization, it was found that the most significant factors were yeast extract, temperature, and inoculum size. According to Face Centered Central Composite Design (FCCCD), the maximum hydrogen concentration and yield were 630.67 μmol/L and 7.42 mmol H₂/mol glucose, respectively, which is obtained from the sample supplemented with 4.8 g/L yeast extract concentration, 5% inoculum, and incubated at the temperature of 31 °C. Cumulative hydrogen production curve fitted by the modified Gompertz equation suggested that H_max, R_max, and λ from this study were 15.10 mL, 2.18 mL/h, and 9.84 h, respectively.     

Magnetic Properties of Mechanically Alloyed Cobalt-Zinc Ferrite Nanoparticles

In this work, the physical and the magnetic properties of cobalt-zinc ferrite nanoparticles, synthesized via high-energy ball milling (HEBM), were examined. X-Ray diffraction (XRD), field emission scanning electron microscopy (FeSEM), and scanning transmission electron microscopy (STEM) were used to study changes of the powder structure and morphology analyses. Hysteresis and permeability measurement were carried out using a BH hysteresisgraph system and an impedance analyzer, respectively. The results suggested improved magnetic properties of Co_0.5Zn_0.5Fe₂O₄ with increasing sintering temperature from 950 °C up to 1200 °C. However, the variations of the magnetic responses were consistent with the varying volume concentration of the ferrite composites. Unlike the highly crystalline pure ferrite which showed magnetic resonance within the measured frequency, the crystallineamorphous composites showed no visible resonance peak. This proved that the resonance peak shifted to higher frequency as a result of the single domain spin behavior in the absence of domain walls movement.     

A comprehensive review on theoretical framework‐based electric vehicle consumer adoption research

Green vehicles, such as electric vehicles (EVs), are getting noteworthy popularity among consumers worldwide. The purpose of this paper is to establish EVs as a feasible long‐term solution for the future of technology in the vehicle industry, which can decrease the current dependency on fossil fuels and also decrease greenhouse gas (GHG) emissions. As a part of long‐term benefits, the adoption of EVs gives environmentally friendly innovation to society. Despite positive environmental implications, the total number of EVs in usage is still inadequate. One of the major causes of this insubstantial adoption of EVs is largely dependent on the perceptions of consumers regarding EVs. However, this particular research study offers an inclusive outline on the existing hurdles for consumer adoption of EVs as well as a framework of the theoretical standpoints that were developed for the adoption behaviour, in addition to considering consumer intentions in the direction of EVs. In this particular study, the researcher found that the literature regarding EV adoption tried to address only the diffusion method of EVs. Whereas this study highlights consumer innovations, which provides a wide insight on consumer emotions to overlook the major aspect in consumer EVs' adoption research. The theme of this particular literature can be implemented in order to better understand the consumers' emotions and behaviour towards the adoption of EVs. The scholars further stated that there is a possible cause for more recent developments within the technological adoption part that can assist to be a standard for upcoming developments. For the last few years, knowledge regarding the problems surrounding the adoption and diffusion of EVs has gained less attention. This study expands this line of research by focusing on making a chance for developing the theoretical frameworks in terms of adding emotions in a psychological perspective where consumer behaviour and ethics are considered. Copyright © 2016 John Wiley & Sons, Ltd.     

Effects of acid strength and micro pore size on -caprolactam selectivity and catalyst deactivation in vapor phase Beckmann rearrangement over acid solid catalysts

The vapor phase Beckmann rearrangement of cyclohexanone oxime (CHO) over solid acid catalysts including zeolites was carried out to elucidate the effects of the acid strength and the micropore size of the catalysts on the selectivity of -caprolactam (CL) and the catalyst deactivation rate. It was found that the catalyst deactivation rate was strongly dependent on the acid strength of the acid catalysts. The improvement of catalyst life was achieved by using MFI-type metallosilicates having weak acid sites. The CL selectivity decreased over the acid catalysts with micropores larger than those of the MFI zeolites. Furthermore, using methanol and carbon dioxide as the diluent solvent and diluent gas improved CL selectivity and catalyst life, respectively.     

Viscosity estimation of triacylglycerols and of some vegetable oils, based on their triacylglycerol composition

The experimentally determined kinematic viscosities of simple triacylglycerols [trilaurin, trimyristin (MMM), tripalmitin (PPP), tristearin (SSS), triolein (OOO), and trilinolein (LiLiLi) were correlated to a modified Andrade-type equation. The constants for the modified equation were derived for each simple triacylglycerol. The method was also used to estimate the viscosity of mixed triacylglycerols [1,2-dimyristoyl-3-palmitoyl (MMP), 1,2-dioleoyl-3-palmitoyl (OOP), 1,2-dimyristoyl-3-oleoyl (MMO), and 1,2-dipalmitoyl-3-oleoyl (PPO)], binary triacylglycerol mixtures (PPO/OOP, PPP/SSS, and OOO/SSS of different portions), and three types of vegetable oils [refined, bleached, and deodorized palm oil; cocoa butter; and canola oil] by applying modified Kay’s rule utilizing the simple triacylglycerol constants derived earlier. In all cases, the estimated values for liquid viscosity were compared with experimental values determined in this work and with previous work from the literature. When applied to vegetable oils, the method requires knowledge of their triacylglycerol composition. Despite its simplicity, the method gives a reasonable estimate. The method may be used to predict the viscosity of different blends of vegetable oils, and the accuracy is expected to increase when more experimental data on simple triacylglycerols become available.     

Effect of inclined roof on the airflow associated with a wind driven turbine ventilator

Rotating wind driven turbine ventilator has been used as cost-effective environmental friendly natural ventilation device. Rotating wind driven turbine ventilator type of device is usually installed on the rooftop to extract air extract air flow from a building to improve air quality and comfort. Performance investigations carried thus far on turbine ventilator have ignored the effect of the inclination on rooftop. An experimental program was, therefore, formulated at the aerodynamic laboratory of the University of New South Wales to study such effect on a simulated rooftop. The results obtained from the measured forces and rotational speeds on different configurations indicate that the effect is minimal in extracting air from a building at low wind speed. The static pressure and skin friction distributions on the simulated roof further supports this finding. Two important conclusions can be drawn from the present investigation: firstly, the presence of the inclined roof may extend the safety margin in the operation of a turbine ventilator at high wind speed by reducing the magnitude of the total force that acts on the ventilator; secondly the dependency of the total fore on low Reynolds number suggests that the efficiency and reliability of operation of such ventilator should be boosted through the provision of other power source such as solar power at low wind speed.     

Protective effect of ω-3 polyunsaturated fatty acids (PUFA) on sodium nitrite induced nephrotoxicity and oxidative damage in rat kidney

Sodium nitrite (SNT) widely used as a curative agent in meat processing industry possesses cell-transforming mutagenic and cytogenic properties. Dietary omega-3 polyunsaturated fatty acids (ω-3 PUFA) has been shown to reduce the severity of certain types of cancers, cardiovascular and renal diseases. The present study examined whether feeding of fish oil (FO)/flaxseed oil (FXO) has protective effect against SNT-induced toxicity. SNT significantly altered the activities of serum creatinine (Crt), blood urea nitrogen (BUN), metabolic and brush border membrane (BBM) enzymes. SNT caused significant imbalances in the antioxidant system associated with increased lipid peroxidation (LPO). Feeding of FO and FXO with SNT ameliorated the changes in various parameters caused by SNT. Nephrotoxicity parameters lowered and enzyme activities of carbohydrate metabolism, BBM and radioactively labeled inorganic phosphate (³²Pi) transport were improved to near control values. The results of the present study suggest that ω-3 PUFA-enriched FO and FXO from sea-foods and plant sources respectively are similarly effective in reducing SNT-induced nephrotoxicity and oxidative damage.     

Formulation and Evaluation of an Automatic Dishwashing Detergent Containing T1 Lipase

The use of enzymes in detergent formulations is becoming popular due to the concerns about the environment. T1 lipase (E.C. 3.1.1.3) was evaluated for its stability and performance in dishwashing along with other common components of an automatic dishwashing detergent. Therefore, the process of formulating the detergent would depend on the stability of T1 lipase, which may also reflect the performance during the washing. T1 lipase was mostly stable in nonionic surfactants, especially those that were made of polyhydric alcohols. T1 lipase was also stable in a mixture of sodium carbonate and glycine. However, sodium carbonate alone destabilized T1 lipase possibly due to the interaction between carbonates and Ca²⁺. These results indicated that polyhydric alcohols and glycine had stabilizing effects on T1 lipase. The dishwashing performance was evaluated in term of percent soil removed. The dishwashing performance of the formulated detergent was positively affected by the increase in temperature but negatively affected by the presence of hard water, specifically Ca²⁺ and Mg²⁺. However, T1 lipase was not negatively affected by the presence of hard water, and this enzyme was enhanced by the presence of polyacrylates. The presence of Ca²⁺ improved the structural integrity of T1 lipase. It is generally known that most enzymes that depend on Ca²⁺ for their structural integrity would be greatly destabilized in the presence of metal chelators; thus, stabilizing strategies such as adding glycine would be essential to maintain enzyme activity during the wash.     

Microwave-assisted urea-modified sorghum biomass for Cr (III) elimination from aqueous solutions

The present study concentrated on the use of an agro-waste biodegradable sorghum biomass in its simple and modified forms for the binding of Cr (III) ions. A relatively new method of modification was adopted using urea under microwave irradiation. FTIR analysis showed the presence of oxygen and nitrogen bearing functional groups in unmodified (UMS) and modified (MS) sorghum biomass. The appearance of new bands and shifts in the peaks confirmed the modification. The influence of different process parameters such as the adsorbent dose, solution pH, contact time, agitation speed and initial metal ion concentration was studied thoroughly to evaluate optimum conditions for adsorption. Maximum adsorption for Cr (III) ions occurred at pH 5.0–6.0 using UMS and MS. Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich isotherm models in a non-linear fashion were used to explain the phenomenon. Maximum adsorption capacity was 7.03 and 16.36 mg of Cr (III) per gram of UMS and MS, respectively. Adsorption mechanism was explored by pseudo-first- and pseudo-second-order kinetic models, and it was found that the process followed pseudo-second-order kinetics. Thermodynamic study indicated the process favorability. The study concluded that urea modification under microwave irradiation produces a non-toxic and more effective adsorbent for Cr (III) remediation by inducing new nitrogen bearing functional groups to sorghum biomass.